|Poly-Tec C40-65 380 U/min/V|
|up to 1.200W and 4,9kg thrust by 5S Lipo|
The Poly-Tec C40-65 is a very compactly built outrunner made of aluminum, in a most modern design. With its no-load speed of 420 rev / min / V, he is very well matched to 6S LiPo. Due to its design and its favorable ratio of length to diameter, it generates an enormous torque of up to 1.350 watts and is ideal for turning large propellers with a very high efficiency. The C40-65 is a real powerhorse.
|Examples for models|
|5S LiPo with foldingprop 17 x 8|
Futana, F3A - Modelle, Discus, Alpina 5001, etc.
|The engine is available as finished unit with soldered gold connectors and sockets supplied for the controller.|
|Dimension:||Ø 50mm x 65 mm|
|Idle speed:||420 U/min/V|
|Voltage:||14,8- 18,5V / 4-5 LiPos|
|Current:||12 - 55A|
|for a short time||60A|
|shaft diameter:||Ø 6,0 mm|
|Propeller / Number of cells (diameter in inches)|
|4S1P||18 x 11 (47A)|
|5S1P||17x8 (48A), 17x9 (60A|