Natterer Modellbau - Combo HFMx M-LINK mit RX-7-DR light M-LINK 181936

Combo HFMx M-LINK mit RX-7-DR light M-LINK

125,40 EUR
incl. 19 % Tax excl.

Lieferstatus:

available

Multiplex
Product No.: 181936
Print product data sheet

Frage zum Produkt

If you frequently switch between 35 / 40 ... MHz and 2.4 GHz with the same transmitter, or wish to use an earlier transmitter on the 2.4 GHz band, then the HFMx M-LINK external
module is the right solution for you.
The module simply plugs into the transmitter’s Trainer socket, and can either be fixed to the transmitter itself or installed in a transmitter tray. No modifications of any kind are required to the transmitter, and the conversion takes just a few moments to complete. The change-over switch on the HFMx M-LINK module provides a convenient means of switching between the different frequency bands - e.g. 35 MHz and 2.4 GHz - at any time.

The plus-points:
• Fast, simple, change-over from 35, 40 ... MHz to 2.4 GHz operation using the switch mounted directly on the HFMx module
• Change-over switch for selecting normal or restricted frequency band (“France mode”)
• Change-over switch for selecting 14 ms (Fast Response) or 21 ms servo frame rate
• Activating button on the module itself for selecting binding mode and range check mode
• LED status indicator

The HFMx M-LINK 2.4 GHz module can be used with the following transmitters:

• Cockpit MM
• Cockpit SX
• Combi 80 / sport / plus
• Combi 90
• Cockpit
• Commander
• Commander mc 2010 / 2015 / 2020
• EUROPA SPRINT
• EUROPA SPORT
• EUROPA mc 1005 / 1010 / 1020
• PiCOline
• PROFI mc 3010 / 3030 / 4000
• ROYAL mc
• ROYALevo 7, 9, 12
• ROYALpro 7, 9, 12

Specification:

Frequency range 2.4000 GHz … 2.4835 GHz
Limited frequency range 2.4000 GHz … 2.4540 GHz
Transmission type 2.4 GHz FHSS M-LINK System
MULTIPLEX-LINK Frequency Hopping Spread Spectrum
Transmitter output 100 mW EIRP
Current drain approx. 50 mA
Temperature range -15°C … +55°C
Dimensions (L x W x H) approx. 83 x 52 x 11 mm (case)
Weight approx. 65 g

RX-7-DR light M-LINK

This is a small, all-purpose seven-channel receiver exploiting MULTIPLEX 2.4 GHz M-LINK technology. It is a dual receiver, featuring two complete receiving circuits operating in parallel
(receiver diversity), ensuring excellent reception quality in spite of the unit’s small dimensions.
The RX-7-DR light M-LINK is a particularly good choice for the smaller model as it is so light and compact. The in-line connector arrangement and compact case design make it suitable for installation in slim glider fuselages, e.g. F3B, F3J, …
• HOLD / FAIL-SAFE function
• Integral button and LED for Binding, FAIL-SAFE programming, RESET and operating status information

Specification:
Servo channel count 7
Reception system 2.4 GHz FHSS
(Frequency Hopping Spread Spectrum)
Operating voltage 3.5 V … 9.0 V
Power supply 4 - 5 NiXX cells, 2S LiPo / LiIo
Permissible operating temperature range - 20°C … + 55°C
Dimensions (L x W x H) approx. 38 x 28 x 11,5 mm
Weight approx. 10 g

For further information, please visit the homepage of this product.

This Product was added to our catalogue on Tuesday, 29. September 2009.

We recommend following products:

2,4 GHz:

Receiver RX-5 light M-LINK 2,4 GHz

36,20 EUR

Empfänger RX-5 M-LINK 2,4 GHz

50,10 EUR

Receiver RX-6 light M-LINK 2,4 GHz (Micro)

46,40 EUR

Receiver RX-6-DR light M-LINK 2,4 GHz

43,00 EUR

Receiver RX-7-DR light M-LINK 2,4 GHz

58,20 EUR

Empfänger RX-7 M-LINK 2,4 GHz

58,40 EUR

Receiver RX-7-DR M-LINK 2,4GHz

74,10 EUR

Empfänger RX-7-DR compact M-Link 2,4 GHz

125,90 EUR

RX-Pack "light" M-Link

153,70 EUR

PC-lead for RX-Synth receivers

32,90 EUR

Customers who bought this product bought also the following products:

	BK EasyStar
	52,90 EUR
	Receiver RX-9-DR M-LINK 2,4GHz
	96,80 EUR
	Receiver RX-6 light M-LINK 2,4 GHz (Micro)
	46,40 EUR
	Servo Tiny-S (UNI)
	13,90 EUR
	Servo HS-485HB
	16,90 EUR
	Receiver RX-6-DR light M-LINK 2,4 GHz
	43,00 EUR