Natterer Modellbau - Combo HFMx M-LINK mit RX-9-DR M-LINK 188758

Combo HFMx M-LINK mit RX-9-DR M-LINK

155,80 EUR
incl. 19 % Tax excl.

available only of customer requirement

Multiplex
Product No.: 188758
Print product data sheet

Frage zum Produkt

If you frequently switch between 35 / 40 ... MHz and 2.4 GHz with the same transmitter, or wish to use an earlier transmitter on the 2.4 GHz band, then the HFMx M-LINK external
module is the right solution for you.
The module simply plugs into the transmitter’s Trainer socket, and can either be fixed to the transmitter itself or installed in a transmitter tray. No modifications of any kind are required to the transmitter, and the conversion takes just a few moments to complete. The change-over switch on the HFMx M-LINK module provides a convenient means of switching between the different frequency bands - e.g. 35 MHz and 2.4 GHz - at any time.

The plus-points:
• Fast, simple, change-over from 35, 40 ... MHz to 2.4 GHz operation using the switch mounted directly on the HFMx module
• Change-over switch for selecting normal or restricted frequency band (“France mode”)
• Change-over switch for selecting 14 ms (Fast Response) or 21 ms servo frame rate
• Activating button on the module itself for selecting binding mode and range check mode
• LED status indicator

The HFMx M-LINK 2.4 GHz module can be used with the following transmitters:

• Cockpit MM
• Cockpit SX
• Combi 80 / sport / plus
• Combi 90
• Cockpit
• Commander
• Commander mc 2010 / 2015 / 2020
• EUROPA SPRINT
• EUROPA SPORT
• EUROPA mc 1005 / 1010 / 1020
• PiCOline
• PROFI mc 3010 / 3030 / 4000
• ROYAL mc
• ROYALevo 7, 9, 12
• ROYALpro 7, 9, 12

Specification:

Frequency range 2.4000 GHz … 2.4835 GHz
Limited frequency range 2.4000 GHz … 2.4540 GHz
Transmission type 2.4 GHz FHSS M-LINK System
MULTIPLEX-LINK Frequency Hopping Spread Spectrum
Transmitter output 100 mW EIRP
Current drain approx. 50 mA
Temperature range -15°C … +55°C
Dimensions (L x W x H) approx. 83 x 52 x 11 mm (case)
Weight approx. 65 g

RX-9-DR M-LINK

High-quality seven-channel / nine-channel receivers exploiting MULTIPLEX 2.4 GHz M-LINK technology. These receivers utilise the latest SMT construction, and are suitable for all types of model. Their compact dimensions and in-line connector arrangement allow them to fit even in models with limited internal space. These receivers feature two complete receiving circuits operating in parallel (receiver diversity). In conjunction with a special signal amplification circuit this ensures very high sensitivity, excellent reception quality and maximum effective system range.
• HOLD / FAIL-SAFE function
• Telemetry / Feedback channel capability
• Integral sensor interface for connecting external sensor modules (max. 16)
• Prepared for dual-receiver diversity operation (diversity lead # 8 5070 required)
• Integral error counter / data logger (voltage errors, signal errors)
• MULTImate compatible
• Integral PC interface

Specification:
Servo channel count 9
Reception system 2.4 GHz FHSS
(Frequency Hopping Spread Spectrum)
Operating voltage 3.5 V … 9.0 V
Power supply 4 - 5 NiXX cells, 2S LiPo / LiIo
Permissible operating temperature range - 20°C … + 55°C
Dimensions (L x W x H) approx. 55 x 35 x 11,5 mm
Weight approx. 25 g