Natterer Modellbau - Combo HFMx M-Link mit RX-5 light M-Link 182456

Combo HFMx M-Link mit RX-5 light M-Link

103,00 EUR
incl. 19 % Tax excl.

Lieferstatus:

available

Multiplex
Product No.: 182456
Print product data sheet

Frage zum Produkt

Specification:
If you frequently switch between 35 / 40 ... MHz and 2.4 GHz with the same transmitter, or wish to use an earlier transmitter on the 2.4 GHz band, then the HFMx M-LINK external
module is the right solution for you.
The module simply plugs into the transmitter’s Trainer socket, and can either be fixed to the transmitter itself or installed in a transmitter tray. No modifications of any kind are required to the transmitter, and the conversion takes just a few moments to complete. The change-over switch on the HFMx M-LINK module provides a convenient means of switching between the different frequency bands - e.g. 35 MHz and 2.4 GHz - at any time.

The plus-points:
• Fast, simple, change-over from 35, 40 ... MHz to 2.4 GHz operation using the switch mounted directly on the HFMx module
• Change-over switch for selecting normal or restricted frequency band (“France mode”)
• Change-over switch for selecting 14 ms (Fast Response) or 21 ms servo frame rate
• Activating button on the module itself for selecting binding mode and range check mode
• LED status indicator

The HFMx M-LINK 2.4 GHz module can be used with the following transmitters:
• Cockpit MM
• Cockpit SX
• Combi 80 / sport / plus
• Combi 90
• Cockpit
• Commander
• Commander mc 2010 / 2015 / 2020
• EUROPA SPRINT
• EUROPA SPORT
• EUROPA mc 1005 / 1010 / 1020
• PiCOline
• PROFI mc 3010 / 3030 / 4000
• ROYAL mc
• ROYALevo 7, 9, 12
• ROYALpro 7, 9, 12

Specification:
Frequency range 2.4000 GHz … 2.4835 GHz
Limited frequency range 2.4000 GHz … 2.4540 GHz
Transmission type 2.4 GHz FHSS M-LINK System
MULTIPLEX-LINK Frequency Hopping Spread Spectrum
Transmitter output 100 mW EIRP
Current drain approx. 50 mA
Temperature range -15°C … +55°C
Dimensions (L x W x H) approx. 83 x 52 x 11 mm (case)
Weight approx. 65 g
RX-5 light M-LINK 2.4 GHz receiver

Small, reasonably priced five-channel 2.4 GHz M-LINK receiver with the UNI connector system. A compact case and small dimensions in conjunction with in-line connectors
make this unit ideal for the smaller model.
Typical applications:
• Model helicopters up to around 80 cm rotor diameter
• Electric and power models up to about 1.3 m wingspan
• Gliders and electric gliders up to about 2 m wingspan
• RC model cars
• RC model boats

The plus-points:
• HOLD / FAIL-SAFE function
• Integral button and LED for:
Binding
FAIL-SAFE programming
RESET
Operating status information

Specification:
Servo channel count 5
Reception system 2.4 GHz FHSS (Frequency
Hopping Spread Spectrum)
Operating voltage 3.5 … 9.0 V
Power supply 4 - 5 NiXX cells, 2S LiPo / LiIo
Operating temperature range -20°C … +55°C
Dimensions (L x W x H) approx. 34 x 19.5 x 11 mm
Weight approx. 7 g

For further information, please visit the homepage of this product.

This Product was added to our catalogue on Friday, 12. February 2010.

We recommend following products:

2,4 GHz:

Receiver RX-5 light M-LINK 2,4 GHz

39,00 EUR

Empfänger RX-5 M-LINK 2,4 GHz

57,00 EUR

Receiver RX-6 light M-LINK 2,4 GHz (Micro)

48,90 EUR

Receiver RX-6-DR light M-LINK 2,4 GHz

46,90 EUR

Receiver RX-7-DR light M-LINK 2,4 GHz

60,70 EUR

Empfänger RX-7 M-LINK 2,4 GHz

68,50 EUR

Receiver RX-7-DR M-LINK 2,4GHz

98,40 EUR

RX-Pack "light" M-Link

169,00 EUR

PC-lead for RX-Synth receivers

33,90 EUR

Customers who bought this product bought also the following products:

	Switch leads
	6,60 EUR
	JR Extension Lead (HD) 750mm
	4,20 EUR
	Sanyo Eneloop Empfängerakku NiMh 4,8V 1900mAh flach Graupner
	17,90 EUR
	Servo DES 657 BB
	24,70 EUR
	Sekundenkleber 20g styro
	11,40 EUR
	Shock-Flyer Mini Apollo
	instead 39,90 EUR only 29,90 EUR